The Structure Of The Ignition Coil

The ignition coil is equivalent to an autotransformer which can convert 12V low-voltage direct current into 15-20KV high-voltage direct current.

According to the structure of the magnetic circuit, the ignition coil can be divided into two types: open magnetic circuit type and closed magnetic circuit type.

Open magnetic circuit ignition coils are widely used in traditional ignition systems。

Closed magnetic circuit ignition coils are mostly used in electronic ignition systems.

Structure of ignition coil:

1. Shell

2. High voltage terminal

3. Low voltage terminal

4. Insulating oil

5. Primary winding

6. Iron core

7. Secondary winding

8. Additional electric just

Primary winding: The primary winding is wound 240 to 370 turns on insulating paper with enameled wire with a diameter of 0.5 to 1.0 mm. In order to facilitate heat dissipation, the primary winding is wound outside the secondary winding, and the primary winding resistance is about 3.4 omega (80 degrees Celsius).

The secondary winding uses enameled wires with a wire diameter of 0.06 to 0.10 mm wound around the outside of the core insulating sleeve, about 11,000 to 26,000 turns. In order to strengthen the insulation and avoid mechanical damage, each layer of wires is separated by insulating paper. The outermost layer There are more layers of insulating paper, or a cardboard sleeve is covered. Its function is to generate mutual inductive electromotive force.

Let’s take a look at the teardown diagram:

Fenomena Kegagalan Gegelung Pencucuhan dan Kaedah Pemeriksaan Praktikal
Bagaimana Untuk Mengeluarkan Dan Memasang Gegelung Pencucuhan Sendiri?
Kaedah Pengesanan Gegelung Pencucuhan Mudah Dan Praktikal
Bagaimana Untuk Menghasilkan Gegelung Pencucuhan?
Bagaimana Gegelung Pencucuhan Berfungsi
Adakah Kita Perlu Menggunakan Gegelung Pencucuhan Asal?